EV - Trolley Rail vehicle
This way of transport is used for higher tonnages or for 3 - shift operation, when is not time to charge the battery. It is most used in Rail modification for manipulation between operating workplaces. The vehicles are charged through the trolley embed in the floor channel. The disadvantage is retracting out. In some cases rises problems with clogging of the charging channel. Very problematic is also crossing of Rails.
Accumulator Rail vehicles are produced in following types. This line can be extended according to customer requirements.
| Type | Loading capacity (t) | Standard size of Platform (mm) width x length | Gauge (mm) |
|---|---|---|---|
| EV | 10 | 2000 x 4000 2000 x 5000 2000 x 6000 | 1435 1435 |
| EV | 20, 30, 40, 50 | 2000 x 4000 2000 x 5000 2000 x 6000 | 1435 1435 1435 |
Technical description
- Platform boards - plywood with rubber coat
- Frame
- Cover of Switchboard
- Fixing points for cargo
- Fixing points for lifting and transport of vehicle
- Axle
- Emergency Stop Button
- Rubber Ends
- Protective frame around the vehicle
- Light and Sound signaling
Active safety kit consist of sensors that stop the vehicle if detects possible collisions and 4 Emergency-STOP buttons located at the corners of the vehicle. When the Emergency Stop Button is pushed down, the vehicle Stop immediately. Passive elements such as a set of LED lights, Protective frame around the car and a color differentiation increase the safety of the operation.
Vehicles are painted with two-component Polyurethane paint. The chassis is not suspended due to low handling speed 35 m / min. For loading capacity over 50 t is necessity to use Yoke axles for steady spread of forces to the chassis rail. Designers guarantee all parameters according to current applicable EU standards. Part of delivery is Operating manual in relevant language and Declaration of Conformity.
Technical parameters
| Parameter | Value |
|---|---|
| Length (mm) | See table of produced typed |
| Width (mm) | See table of produced typed |
| Height (mm) | from 500 up to 720 |
| Gauge (mm) | 1435, 1520 |
| Surface treatment | Polyurethane paint |
| Upper Platform | Steel sheet, Plywood rubber coated |
| Accessories I. | Parking Brake, Turn table, Locking Pins, Pole, Safe bunks, Manually Lifting Upper Platform |
| Accessories II. | Smart Card Reader, Remote control, LED Lights, Safety sensors |
| Accessories III. | Wi-Fi, Lead-acid Batteries with Electrolyte blowing or Gel maintenance-free Batteries |
Advantages
- easy manipulation and simple Parking Brake Control
- high lifetime of components
- low operational cost
- rigid structure
Certificates and documentation
- Declaration of Conformity
- Guarantee Card
- Operating and Maintenance Manual
All vehicles are designed according to EU standards.
Accessories
- mechanical
- Pole
- Safe bunks
- Locking Pins
- Turn table
- Anti-slip floor
- Lifting Upper platform
- Electricity and Battery
- Sensors unblocking
- Horn
- Tandem control of 2 vehicles together
- Safety
- LED Lights
- Smart Card Reader
- Remote Control
- Safety sensors
Photogallery
